2 Inch Sanitary Check Valves Threaded Type With Clamp Type Standard End Connection

1"-6" Sanitary Threaded Check Valve With Clamp Type Standard End Connection

Sanitary Thread Check Valve is male threaded connection sanitary check vavle.Our sanitary thread check valve is suitable with viscous liquids, the size is up to 6″ and the working pressure is a little higher than butt weld or tri clamp check valve. Made in stainless steel AISI 316L or 304, with good surface finish (25 Ra or higher polished body and internals), it is ideal for food, pharmaceutical, dairy and other sanitary industries.

• Available sizes 1/2" - 6"
• Suitable for C.I.P.
• Operating pressure to 150 psi
• Temperature from 30°F min. to 225°F max.
• Standard end connection-clamp type (butt weld &TI-Line upon request)
• Standard seals-FDA Viton (EPDM & other elastomers upon request)
• Internal finish-25 to 30ra average
• Material Test Reports provided upon request
• Eccentric Type available upon request

Sanitary check valve also known as one-way valve, its role is to prevent the pipeline water back in the media. Are different to many other types of valves,for check valves work automatically and most are not controlled by a person or any external control. Accordingly, most do not have any valve handle or stem. Thus there is an important concept in check valves, it is, the cracking pressure. Cracking pressure is the minimum upstream pressure at which the valve will operate. So the check valve is designed for and can therefore be specified for a specific cracking pressure.

Specification of Sanitary Thread Check Valve

Dimension of Male/Female Threaded Check Valve – DIN Series

Dimension of Male/Female Threaded check valve – SMS Series

Dimension of Male/Female Threaded check valve – 3A Series

tri clamp check valve

sanitary non return valve

2 Inch Sanitary Check Valves Threaded Type With Clamp Type Standard End Connection Images